VINTAGE PREBAN ELEPHANT IVORY
1911 PISTOL GRIPS

IMPORTANT JULY 11TH IVORY LAW UPDATE
Click here now to read more.

Please read this and contact your representatives today,
you can make a difference!


White smooth bone/ivory handled knives, letter openers and money clips for scrimshaw, carving or carrying as is, all with nickle silver or brass bolsters. If you have a knife you would like to have re-handled, we offer this service in a variety of bone or (ivory types with approximately 2 week turnaround time, please inquire).

FULL SIZE OR COMPACT/OFFICERS COLT, SPRINGFIELD,
KIMBER, SMITH AND WESSON, RUGER, LES BAER,
WILSON, AND OTHER 1911 GRIPS.

These grips are made from PRE-BAN African elephant ivory and are photographed with lights angled to best show their individual uniqueness. Some have ghost stains that look like water marks on paper usually seen only in mammoth ivory. Others have presentation grade grain, outer bark or other variations.

FOR SALE IN U.S. ONLY, SEE MAMMOTH IVORY FOR INTERNATIONAL.


Pay now through PayPal with your Visa, Mastercard, Discover,
American Express or your PayPal account.

Payment with Credit Card: Add items to your cart and then click the "Check Out" button. Under the Choose a way to pay section, choose the DonŐt have a PayPal account? on the bottom. Or if you prefer to place your order by telephone, please call 1-800-423-1945.


NEW FANCY 1911 HEX SCREWS
Sold Separately!
STAR
FLOWER
PINWHEEL
COLT
SHIELD
SWIRL
CELTIC
Pick your favorite style, each set of four high quality steel screws comes with a hex wrench and will work with any 1911 style pistol. No more buggered up slotted screws - $20.00 per set or polished to match your stainless - $25.00. If you have slimline grips, please let us know and we will shorten the screws for an additional $5.00.
Fancy Hex Screws
$20.00
Style:
Fancy Hex Screws - Polished
$25.00
Style:
Fancy Hex Screws - Slimline
$25.00 - $30.00
Finish:
Style:

Genuine Colt, Smith and Wesson and Ruger
Medallions are $15.00 per set installed.
We do not install medallions in slimline grips!
Colt Medallions - $15.00
Options:
S & W Medallions - $15.00
Silver only!
Ruger Medallions - $15.00
Options:

MAGWELL, STANDARD OR BOBTAIL?
All magwell grips can be turned into standard or bobtail grips and
standard grips can be turned into bobtails (at no additional cost).

Magwell
Standard
Bobtail Style 1
Bobtail Style 2

FULL SIZE 1911 PISTOL GRIPS
These grips will fit most full sized frames such as Springfield, Taurus,
Smith and Wesson,Les Baer, Ruger, Wilson,
Kimber full size, pro-custom or ultra-plus and Others.

Full size will fit any of the 1911 or 1911-A1 frame auto pistols and are approximately 4 inches tall. No fitting required, just take off your old grips and put ours on! Unless they are for a Kimber "magwell" as these grips are flush cut, and not beveled on the bottom or if you have an ambidextrous safety (as they require inletting on the right grip).

(1.) Subtle grain available
with Magwell
(Standard or Bobtail cut)
$250.00
Butt-cut Options:
Ambidextrous Safety Cut-out?
(2.) SOLD (3.) SOLD

(4.) Gorgeous grain available
with Standard or Bobtail cut
$395.00
Butt-cut Options:
Ambidextrous Safety Cut-out
(5.) Gorgeous grain available
with Standard or Bobtail cut
$425.00
Butt-cut Options:
Ambidextrous Safety Cut-out
(6.) SOLD

(7.) SOLD
(8.) SOLD
(9.) SOLD

(10.) SOLD (11.) SOLD (12.) SOLD

(13.) SOLD (14.) SOLD (15.) SOLD

Full Size Slimline Model Grips

Slimline grips are thinner than a standard 1911, and go on a 1911 that has the slimline (low profile) grip bushings. They will not work on a standard 1911 unless you replace your standard bushings with slimline bushings. This can easily be done with a slotted screw driver unless you have a Les Baer, their bushings are glued in and the gun must be sent in to swap bushings. Slimline bushings can be swapped out for standard if you desire a thicker grip and have slimline grips now. Our fancy screws need to be shortened if you are ordering them for slim line grips, make sure you tell us, there is a $5 machineing fee.

(SL-1.) SOLD (SL-2.) SOLD (SL-3.) SOLD

OFFICERS/COMPACT MODEL PISTOL GRIPS
These grips will fit most compact frames such as Springfield, Smith and Wesson,
Les Baer, Ruger, Wilson, Kimber compact or ultra and Others.

Slimline grips are thinner than a standard 1911, and go on a 1911 that has the slimline (low profile) grip bushings. They will not work on a standard 1911 unless you replace your standard bushings with slimline bushings. This can easily be done with a slotted screw driver unless you have a Les Baer, their bushings are glued in and the gun must be sent in to swap bushings. Slimline bushings can be swapped out for standard if you desire a thicker grip and have slimline grips now. Our fancy screws need to be shortened if you are ordering them for slimline grips, make sure you tell us, there is a $5 machining fee.


(OMSL-4.) SOLD (OM-5.) SOLD (OM-6.) SOLD

Return to BTC Home Page
Last updated: July 22, 2014
Info & Ordering
Laws
Order Form
Working with Ivory
Ivory Beads
Other Beads
Bone Boxes
Bone Scrimshaw
Books
Bracelets
Canes
Elephant Ivory
Eskimo Artifact
Hippo
Horns
Ivory Blanks
Knives
knives
Mammoth
Misc Raw Materials
Narwhal
Scrimshaw Supplies
Shark Teeth & Jaws
Skins
Misc.
Walrus Ivory
Links